How to Use the Nexus Rabbit Clitoral Stimulator DOXY Attachment
By Nexus | Published: 2026-11-02
Category: How-to Guides
Turn your Doxy 3 wand into a rabbit-style massager with the Nexus attachment. Follow these steps for safe setup and comfortable dual stimulation.
Quick answer
Unscrew the head of your Doxy 3 Massager, screw on the Nexus Rabbit Clitoral Stimulator attachment, and use the wand's controls to enjoy simultaneous clitoral and G-spot stimulation. Start on the lowest power setting and adjust as comfortable.
Why the attachment changes the experience
The Nexus attachment is shaped like the Nexus Cadence, adding a rabbit-style external arm to your Doxy 3. That means you get clitoral stimulation from the attachment while the wand's vibrations also reach internally for G-spot sensations. The firm silicone holds its shape, so you can apply steady pressure without the arm flopping around. Because it relies on the Doxy 3's motor, the power and patterns are controlled entirely by the wand—there are no separate buttons or settings on the attachment itself.
What to check before you start
The attachment is designed specifically for the Doxy 3 Massager. It will not fit other wand models, so confirm your wand is a Doxy 3 before ordering. The silicone is non-porous, which makes it easy to clean, but it is not waterproof—keep the wand and attachment away from water. Also note that the attachment does not come with its own power source or remote; you will use the Doxy 3's controls for everything.
Step-by-step setup and use
- Unscrew the Doxy 3 head: Hold the wand body firmly and twist the original massage head counterclockwise until it comes off. Set it aside in a clean spot. Do not force the head if it feels stuck; check for any locking mechanism or consult the Doxy manual.
- Attach the Nexus Rabbit: Line up the threads on the Nexus attachment with the wand's screw base and turn clockwise until snug. Do not overtighten—hand-tight is enough to prevent wobbling. A common mistake is cross-threading; start turning slowly and back off if you feel resistance.
- Apply lubricant: Add a few drops of water-based lubricant to the silicone surfaces of the attachment that will contact your body. Avoid silicone-based lube, which can degrade silicone toys over time. Use only water-based lube to protect the silicone.
- Position the attachment: Lie down or sit in a comfortable position. Guide the rabbit arm so it rests against your clitoris while the main shaft points toward the G-spot area. Adjust the angle until both points feel comfortable. If the arm presses too hard, try a different position or add more lube rather than forcing it.
- Turn on and start low: Switch on the Doxy 3 at its lowest power setting. Let yourself adjust to the sensation before increasing intensity or trying pattern settings. Starting low helps you find the right pressure and avoids overstimulation.
- Explore settings gradually: Cycle through the Doxy 3's speed and pattern options to see what feels best. Because the attachment has no separate controls, all changes happen on the wand. Keep the wand within easy reach so you can adjust without breaking contact.
- Clean after use: Unscrew the attachment, wash it with warm water and mild soap or a toy cleaner, rinse thoroughly, and let it air dry. Wipe the wand body with a damp cloth—do not submerge it. Never put the Doxy 3 itself in water; only the silicone attachment is washable.
Product facts
- Nexus - Rabbit Clitoral Stimulator - DOXY Attachment: Made from firm, high-quality silicone and shaped like the Nexus Cadence. The firm silicone holds its shape for consistent pressure, and the Cadence-inspired shape is designed for dual stimulation.
Nexus - Rabbit Clitoral Stimulator - DOXY Attachment - Nexus - Rabbit Clitoral Stimulator - DOXY Attachment: Screws onto the Doxy 3 Massager after unscrewing the original head. You can swap it on in seconds without tools, but it only fits the Doxy 3—not other wands.
- Nexus - Rabbit Clitoral Stimulator - DOXY Attachment: Non-porous silicone construction. Non-porous silicone is easy to clean and less likely to harbor bacteria, so wash it before and after each use.
