A simple attachment that changes your Doxy 3
The Nexus Clitoral Stimulator is a silicone head designed to replace the standard head on a Doxy Number 3 Massager. Instead of the usual wand tip, you get soft, flexible wings that flutter and a soft, squidgy nub that can press against erogenous zones. Setup is a straightforward screw-on swap, and the care routine is mostly about keeping the silicone clean and checking the fit before each use.
How to attach the Nexus Clitoral Stimulator
The supplied instructions describe a simple unscrew-and-replace process. Work with the massager switched off and unplugged before you start.
- Remove the original Doxy 3 head: Unscrew the existing massager head from the Doxy Number 3 body.
- Line up the Nexus attachment: Position the Nexus Clitoral Stimulator where the original head was, with the threaded connection aligned.
- Screw the attachment into place: Thread the attachment on and tighten it by hand. The supplied instructions say simply to unscrew the Doxy 3 head and replace it with the Nexus attachment.
- Check the fit before use: Give the attachment a gentle tug to confirm it is seated. If it feels loose, unscrew it and rethread it straight.
What the attachment is made of
- Nexus - Clitoral Stimulator - DOXY Attachment: Made from firm, high-quality dual-density silicone. Dual-density silicone gives the wings flexibility while the nub stays firm enough to press where you want it.

Nexus - Clitoral Stimulator - DOXY Attachment - Nexus - Clitoral Stimulator - DOXY Attachment: The silicone is non-porous, hypo-allergenic and odourless. A non-porous surface is easier to clean thoroughly, and an odourless material keeps storage simple.
Cleaning and caring for the silicone attachment
The supplied information does not include a specific cleaning procedure, so treat the attachment as you would other quality silicone toys. Remove it from the Doxy 3 before cleaning so you can reach the wings and nub properly.
- Clean after each use: Wash the silicone attachment with a dedicated toy cleaner or mild soap and warm water, then rinse well. The non-porous silicone surface is designed to be easy to wash.
- Dry completely before storage: Pat the wings and nub dry with a clean cloth or let them air dry fully. Store the attachment separately from the massager to keep the silicone free of dust.
- Check the threads and wings: Before each use, look over the attachment for cracks, tears or debris around the screw thread. A damaged attachment should not be used.
Setup tips for a better fit and feel
Because the wings are soft and flexible, they respond to pressure rather than staying rigid. Start with the nub positioned where you want pressure and let the wings flutter around it. If the attachment feels like it is not sitting flush, unscrew it fully and start again rather than forcing it.
Keep the Doxy 3 switched off while attaching or removing the head. The attachment is designed for the Doxy Number 3 Massager specifically, so check your massager model before buying.
What the supplied information does not cover
The supplied product record does not include a cleaning schedule, lubricant compatibility guidance, or storage instructions beyond the material details. If you need those specifics, check the manufacturer's documentation for the Doxy 3 and the Nexus attachment. The record also does not confirm whether the attachment is compatible with other Doxy models, so treat the Doxy Number 3 as the supported pairing.


