Nexus G-Stroker Setup: Remote Prostate Massager Guide
By Nexus | Published: 2026-11-03
Category: How-to Guides
Set up your Nexus G-Stroker for hands-free play: charge the remote, pair it, and follow a step-by-step first-use routine with practical checkpoints.
Quick answer
Charge both the G-Stroker and its remote fully, pair them before insertion, then test each vibration and stroker-bead setting externally. Only after that should you move to hands-free play.
Why setup order matters with a remote-controlled toy
A remote removes the need to reach for the toy mid-session, but it also means any pairing or battery problem shows up when you are least able to fix it. Doing the setup steps in order keeps the remote as a convenience rather than a source of interruption.
The G-Stroker's remote is rechargeable and waterproof, with a stated range of 8 metres. Treat that range as a maximum in open space: walls, bedding and body position can all shorten it, so keep the remote within easy reach for the first few sessions.
What the catalog does not tell you
The supplied product information does not list a specific charging time, a battery-life figure or a step-by-step pairing button sequence. Check the instructions that come with your unit for those details rather than guessing, and use the steps below as the order to follow once you have them.
It also does not state a maximum insertion depth or a recommended lubricant type. Choose a lubricant compatible with the toy's material as stated on the packaging, and stop if anything feels sharp or uncomfortable.
Step-by-step G-Stroker setup
- Charge before you play: Charge the G-Stroker and the remote until they are fully charged, using the supplied charging method. Do this well before your session rather than immediately beforehand. A part-charged remote can cut out mid-session, so charge both parts fully first.
- Pair the remote: Follow the pairing sequence in your unit's instructions, keeping the remote close to the toy. Once paired, test one button press and confirm the toy responds. If there is no response, re-check the pairing sequence before assuming the toy is faulty.
- Run an external test: Before insertion, cycle through the vibration and bead settings while the toy is in your hand. Note which settings feel gentle and which are intense. Starting on the lowest setting after insertion avoids a sudden jump in intensity.
- Apply lubricant: Apply a lubricant compatible with the toy's material to the shaft and to yourself. Use more than you think you need for a first session. Reapply rather than pushing through dryness or friction.
- Insert slowly and check the remote: Insert at your own pace, then press the remote once to confirm it still responds at close range. Keep the remote in your hand or within reach on the bed. If the remote stops responding, bring it closer before changing settings.
- Explore one setting at a time: Change only one thing at a time: vibration intensity first, then bead motion, then position. Give each change a few moments before adjusting again. Changing several settings at once makes it hard to know what to repeat next time.
- Clean and dry after use: Remove the toy, switch it off, and clean it according to the manufacturer's instructions. Dry the toy and the remote before storing them. Store the remote separately so it is not accidentally activated in a drawer.
Product facts
- Nexus - G-Stroker - Prostate Massager with Remote Control: The G-Stroker combines stroker beads in the shaft with vibrations in the base, and includes a rechargeable waterproof remote with an 8-metre stated range. You get two separate sensations to test during setup, and the remote can be used without worrying about splashes.
Nexus - G-Stroker - Prostate Massager with Remote Control
