The G-Rider + is two toys in one body
The Nexus G-Rider + is a rechargeable, waterproof vibrator with a contoured shaft and a stimulation base, designed for dual internal and external stimulation. What makes it unusual is the removable silicone outer: take it off and the core works as a non-vibrating finger vibrator. That single design choice shapes both how you use it and how you clean it.
The supplied information describes the silicone as phthalate-free and soft, with six vibration settings controlled by a button. Insertable length is 10cm and the shaft measures 4cm at its widest point. Both Black and Purple options are listed. The record does not specify charging time, run time, or battery type, so treat those as things to confirm with the product packaging rather than assumptions.
What the catalog confirms
- Nexus - G-Rider + - Unisex Vibrator: Insertable Length 10cm; shaft width at widest point 4 cm These are the only two dimensions supplied, so they are the numbers to check against your own preferences before ordering.

Nexus - G-Rider + - Unisex Vibrator - Nexus - G-Rider + - Unisex Vibrator: Made from luxurious soft silicone that is phthalate-free Material matters for lubricant compatibility and for how you clean the toy.
- Nexus - G-Rider + - Unisex Vibrator: For use with water based lubricants only This is the one hard rule in the record. Silicone-based lubricants are not listed as compatible.
- Nexus - G-Rider + - Unisex Vibrator: Remove the silicone outer for cleaning or to use as a non vibrating finger vibrator The sleeve comes off for two reasons: cleaning and a different mode of play.
A supported routine for using the G-Rider +
The supplied record gives a short list of operating facts rather than a full manual. The steps below stick to what is confirmed and leave room for you to follow any additional instructions that come in the box.
- 1. Decide which configuration you want: With the silicone outer on, the G-Rider + works as a vibrating toy with a contoured shaft and stimulation base. With the outer removed, the core is described as a non-vibrating finger vibrator. Choose before you start so you are not changing parts mid-session.
- 2. Apply water-based lubricant only: The record explicitly states water-based lubricants only. Check the label of any lubricant you already own before using it with this toy.
- 3. Use the button to cycle the six vibration settings: The G-Rider + has six individual vibration settings, changed at the touch of a button. The record does not describe the order of the settings or whether there is a memory function, so cycle through and find what suits you.
- 4. Remove the silicone outer when you want the finger vibrator mode: This is the same removal step used for cleaning, which makes the sleeve the part to inspect and care for most often.
- 5. Clean after each use: Remove the silicone outer and clean it separately from the core. The record confirms the sleeve is removable for cleaning but does not specify a cleaning product, temperature, or drying method, so follow the instructions supplied with the toy.
Lubricant compatibility: the rule worth repeating
Of everything in the supplied record, the lubricant instruction is the most specific and the easiest to get wrong. The G-Rider + is for use with water-based lubricants only. If you keep a silicone-based lubricant in the drawer for other toys, set it aside for this one.
The record does not say what happens if a non-water-based lubricant is used, and it does not list any exception. Treat the instruction as a firm compatibility note rather than a preference.
Cleaning a unisex vibrator with a removable sleeve
The removable outer is the feature that makes cleaning the G-Rider + more straightforward than a one-piece toy, but it also means two surfaces to look after.
- Separate the parts first: Remove the silicone outer before cleaning. The record lists this as the supported way to prepare the toy for cleaning.
- Clean the sleeve and the core as separate items: The silicone outer and the vibrating core are different materials in contact with each other. The record does not confirm that the core is waterproof in the sense of being submersible, only that the toy is waterproof overall, so avoid assuming the core can be treated exactly like the sleeve.
- Check the sleeve for wear: Because the outer is removed and refitted regularly, it is the part most likely to show handling wear. The record does not give a replacement interval, so inspect it as part of your routine.
- Dry before reassembly: The record does not specify drying instructions. Reassembling a damp sleeve against the core is best avoided as a general practice, but confirm any specific guidance in the packaging.
Rechargeable vibrator maintenance without guesswork
The G-Rider + is described as waterproof and rechargeable, and the store carries a one-year warranty on all products. Those are the confirmed maintenance-relevant facts. The record does not state charging time, expected battery life, the charging connector type, or whether the toy can be used while charging.
That gap matters for maintenance planning. Rather than inventing a charging schedule, keep the charging cable with the toy, charge it according to the instructions that arrive with it, and use the one-year warranty as your route if the rechargeable cell stops behaving as expected. Store the toy with the sleeve removed or loosely fitted so the silicone is not compressed for long periods, though the record does not prescribe a storage method.
Practical checkpoints before and after each session
- Lubricant label check: Water-based only is the confirmed rule. This is the checkpoint to repeat every time, especially if you share lubricant with a partner or other toys.
- Sleeve seating check: Because the outer is removable, confirm it is properly fitted before use. The record does not describe a locking mechanism, so fit is something to verify by feel.
- Setting check: Six settings are available via a single button. If you hand the toy to a partner, expect to cycle through rather than jump directly to a favourite setting, since the record does not confirm a memory function.
- Post-use separation: Remove the silicone outer after use as the first step of cleaning. Doing it immediately prevents residue drying between the sleeve and the core.
What the supplied information leaves open
A few questions a new owner might reasonably ask are not answered by the catalog record: the exact charging time, the number of hours per charge, whether the vibration settings include patterns or only steady speeds, and the recommended cleaning solution. None of these are safety concerns in themselves, but they are worth checking against the packaging or the manufacturer's own documentation rather than filling in from assumption.
The dimensions are the other area to treat carefully. The 10cm insertable length and 4cm widest shaft width are the only measurements given. If you are comparing the G-Rider + with another toy, use those two figures rather than a general impression of size.


